| Customization: | Available |
|---|---|
| Number of Charging Interfaces: | One Pile with Multiple Charges |
| Location: | Public Use |
|
Still deciding? Get samples of US$ 8000/unit
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Specification | Model | Three-gun fast charger CCS-CHAdeMO- AC Type 2 |
| AC Nomal Input | Phases/Lins | 3 phase+neutral+PE |
| Voltage | 400VAC±10% | |
| Frequency | 50Hz±10% | |
| Connector | AC Type-2,CCS 2,CHAdeMO | |
| Output | Power | AC Type-2:22kw, CCS 2:50kw, CHAdeMO:50kw, |
| Volatge | AC Type-2:380-480VAC, CCS 2:200-750VDC/1000VDC CHAdeMO:200-500VDC, |
|
| Cable Lenth | 5m | |
| Cable Type | Charging cable and connecter permanently attached to EVSE (liquid cooled) | |
| Electrial Parameter | Power Factor | ≥0.99,≥ 0.96 (Full Load) |
| THD Value | ≤5% | |
| Stable Voltage Accuracy | ≤±0.5% | |
| Stable Current Accuracy | ≤±1% | |
| Efficiency | ≥95% at nominal output power | |
| Structure Design | Housing Material | Galvanized steel |
| Installation Method | Vertical installation of ground | |
| LED Indicator | 10 inches with 720 x 480 pixels TFT LCD Screen, user interface with touch screen or keypad.Toughened unbreakable glass to be used for display screen | |
| ON-OFF (Start-Stop) Switches | Mandatory | |
| Emergency Stop Button | Mushroom headed type | |
| Payment Method | RFID CARD | |
| Communication | Charegr v.s. Backend | Ethernet, and 2G/3G/4G |
| Communication Protocal | OCPP1.6 | |
| Environmental in dex | Working Temperature | -20ºC-+65ºC |
| Storage Temperature | -40ºC-+65ºC | |
| Working Altitude | ≤2000M | |
| Atmospheric pressure intensity | 80 kpa to 110 kpa | |
| Application Site | Indoor/Outdoor | |
| Cooling Method | Forced air cool | |
| Security Protection | Multiple Protection | Over Current, Under Current, Over Voltage, Residual Current, Surge Protection, Short Circuit, Earth Fault at input and output, Input Phase reversal, Emergency Shut-down with alarm, over temperature, Protection against electric shock. |
| Warranty | 1 years | |
| Package Information | Product Dimension | 700*600*1900(W*D*H) |
| Net Weight | 230KG | |
| External Packing | Wooden case | |
| General Requirements | ||
| Energy Transfer Mode | Conductive | |
| Charging Mode | CHAdeMO - mode 4 - DC Fast Charging CCS 2.0 - mode 4 - DC fast charging Type-2 AC - mode 3 |
|
| Reliability and Serviceability | Modularity, self-diagnostic features, fault codes and easy serviceability in the field | |
| System Structure | ||
| Regulation Method | Regulated DC EV Charging Station with combination of CVC or CCC but not simultaneously | |
| Isolation | Each output isolated from each other with proper insulation | |
| Power Supply | DC EV charging station connected to AC mains | |
| Charge control communication | Communicate by digital and analog signals | |
| Interface inter-operability | Inter-operable with any EV supporting CCS or AC Type-2 (for each gun respectively) | |
| Operator | Operated by a trained person or EV owner | |
| Input Requirements | ||
| Input Supply Failure Backup | Battery backup for minimum 1 hour for control system and billing unit, to enable activities such as billing, to be provided | |
| Output Requirements | ||
| No. of Outputs | 3 | |
| Output Connectors | 3 output connectors | |
| Output Connector Compatibility | AC Type 2: IEC 61851-22, IEC 62196-2 Mode 3 CCS: IEC 61851-23/24, IEC 62196-3, DIN 70121. CHAdeMO: IEC 61851-23/24, JEVS G 105, Rev. 1.2 compliant |
|
| Mechanical Requirements | ||
| Mechanical Stability | Shall not be damaged by mechanical impact as defined in IEC 61851-1 | |
| Mechanical Impact | Shall not be damaged by mechanical impact as defined in IEC 61851-1 | |
| User Interface and Display Requirements | ||
| Visual | Visual Indicators:Error indication, Presence of input supply indication, State of Charge process indication. Voice notifications:Voice Notifications: Related to start and stop of charging session in English |
|
| Support Language | English, with provision for additional regional languages | |
| Display Messages | EVSE should display appropriate messages for user during the various charging states like:-Vehicle plugged in / Vehicle plugged out'-Duration since start of charge and kWh consumed'-User authorization status'-Fault Conditions-Metering Information: Consumption Units | |
| Performance Requirements | ||
| DC Output Voltage and Current Tolerance | DC Output current regulation in Constant Current Charging (CCC); ±2.5 A for the requirement below 50 A, and ±5% of the required value for 50 A or more DC Output voltage regulation in constant voltage charging (CVC); |
|
| Control delay of charging current in CCC | DC output current demand response time1 s Ramp up rate: 20 A/s or more.Ramp Down rate: 100 A/s or more | |
| Descending rate of charging current | EVSE should be able to reduce DC current with the descending rate of 100 A/s or more | |
| Periodic and random deviation(Current ripple) | DC Output current ripple limit of EVSE:1.5 A below 10 Hz, 6 A below 5 kHz, 9A below 150 kHz | |
| Periodic and random deviation(Volatge ripple) | Max. Ripple voltage ±5 V. Max slew rate ±20 V/ms | |
){kind=link}